If a Pagefile is too small, it may cause the PC to crash frequently. If it is too big, it might take up a significant amount of storage space on your hard drive. So how do you know what the right size is? This article discusses how to determine the optimal Pagefile size on your Windows 10 and set it.
What is Pagefile
Pagefile is a hidden system file on your hard drive that is primarily there to compensate for low RAM. Pagefile serves as an extension to RAM. Data that cannot be processed in RAM due to lack of space is saved in pagefile and swapped in RAM when it is free. This Pagefile is hidden at the root of the system volume and can be seen if hidden files and folders are configured to be visible. It is also where the Operating System itself places files and logs in case a system crashes. This is known as Crash Dump files. If there is not sufficient space within the Pagefile, the system might throw a BSOD. Now that you get the gist of what a Pagefile is, let us discuss the optimal size of a Pagefile.
Determine optimal Pagefile size in Windows 10
Since the Pagefile is directly associated with the system RAM, and by default, its size is managed by the Windows itself, its size cannot be fixed. Each system can have a different size for the Pagefile. If a system has a lot of RAM that is not usually consumed, a PC might not even need a Pagefile as it would not need to vacate the RAM at all. However, if a system has low RAM, then the Pagefile can be significantly bigger. For example, a PC with 2 GB RAM may have a Pagefile of 4 GB in size. Whereas a PC with 8 GB RAM may have a Pagefile size of 2 GB. Microsoft recommends a range of minimum and a maximum size of Pagefile, and you may set the size of the Pagefile in between that range, according to the criteria that follows: Microsoft says that a PC should have a minimum Pagefile size of RAM, plus an extra 257 MB. Meaning, if your system’s RAM is 8 GB, then your Pagefile size should be at least 8449 MB. For the maximum, Microsoft suggests that the Pagefile size should be 3 times that of the system RAM, or 4 GB, whichever is larger. For example, if the RAM on your PC is 1 GB, then the Pagefile size should be a maximum of 4 GB. However, the upper limit is then restricted by the amount of storage on the hard drive. Hence, it is not advisable to set the maximum value of the Pagefile to something that would significantly affect your storage. There is still to decide what one should set the Pagefile size to, even after Microsoft has designated the upper and lower limits. For that, we suggest that you adapt the technique below to know what the actual size of the Pagefile ought to be. You can now figure out what the size of your Pagefile should be, which needs to be just over the amount that is being used. Now that we know what the size needs to be so that the system has optimal performance and the storage space is not compromised, let us dig into how you can change the Pagefile size.
Set Pagefile size in Windows 10
You can set your Windows 10 to stop managing the Pagefile size and define the upper and lower limits yourself. Use the guide below to customize the Pagefile size. You can now check that the Pagefile size has been set to the minimum value you have allotted, increasing to the maximum value over time.
Closing words
For mission critical systems, it is recommended that RAM should be increased so that the system can process data in RAM which is much faster than the hard drive. But for an everyday use system, you can use pagefile settings as recommended in this article. Also see:
How Much Space Does Windows 11 Installation Take?How To limit CPU Usage in Windows 10How to Fix and Disable Low Disk Space Warning in WindowsHow to Use File History And Backup & Restore In Windows 10How to show Folder size in Windows Explorer
